MCollectiveアーキテクチャ編4-MCollective各種プラグインの導入とテスト
ゼロ基礎学習Puppet自動化構成管理シリーズドキュメント
MCollectiveはただのフレームワークであり、上で様々な役割を果たす必要がある場合は、さまざまなプラグインのサポートが必要です.公式には多くのプラグインが提供されていますが、このほかにもshellプラグインなどサードパーティ製のプラグインがあります.以下では、さまざまなプラグインのインストールと、プラグイン間の組み合わせについて説明します.
1、mcollective client側とserver側に各種公式サイトpluginsを設置する
まず各プラグインを公式サイトにダウンロードしますhttp://yum.puppetlabs.com
1.1 collective-clientエンドのダウンロード
1.2 mcollecitve-serverエンドのダウンロード
以上のインストールはpackageモジュールで実行できます.以下はmcollective server側のみです.インストールが完了したら、サービスを再起動してください.サービスモジュールを書いたら自動的にリフレッシュできます.
1.3 plugins.ppの作成
1.4 conf.ppの作成
1.5 mcollective-clientエンドがインストールされたら、mcoコマンドで表示できます.
1.6 mcollective-serverエンドがインストールされたら、mco-clientエンドで表示できます.
注意:次に、さまざまなコマンドの操作の組み合わせをテストします.ここでは、いくつかの例を挙げます.詳細は、helpまたは公式サイトを参照してください.
2、shellプラグインのインストール
プラグインのダウンロード先:https://github.com/kisspuppet/mcollective-plugins、githubクライアントの子供靴が直接cloneできますhttps://github.com/kisspuppet/mcollective-plugins.git
2.1、ダウンロードプラグインは対応するディレクトリに入ればよい
メモ:mcollective-serverエンドの導入が完了したら、mcollectiveサービスを再起動してください.
2.2、shellプラグインが正常にロードされたかどうかを確認する
mcollective-clientエンドshellプラグインがすでに存在することがわかります
mcollective-serverエンドshellプラグインもロードされていることがわかります
2.3.shellプラグインによるshellコマンドの実行
対端uptimeコマンド負荷の表示
すべてのノード/etc/passwordファイルのpuppetユーザーの行を表示
ホストのrootパスワードを変更
メモ:詳細な手順は、mco shell--helpヘルプを参照してください.
警告:mcollectiveベースのshellプラグインは強力ですが、ダイナミック表示のコマンド以外はrootで操作できます.基本的には操作できます.従って、操作も非常に危険であり、生産環境の実情に応じて決定することができる.
注意:次に、さまざまなコマンドの操作の組み合わせをテストします.ここでは、いくつかの例を挙げます.詳細は、helpまたは公式サイトを参照してください.
3、mcollective各種pluginsを組み合わせて各種任務の組み合わせを完成する
3.1、オペレーティングシステムがRHEL 5.xサーバーであるcrondタスクを停止する
まず5.xシステムcrondの状態を確認し、プラグインサービス、factsを使用します.
次にサービスプラグインでサービスを停止し、プラグインサービス、factsを使用します.
フィルタリングされたホストcrondサービスが停止しているかどうかを再確認し、プラグインサービス、factsを使用します.
shellプラグインで実現することもでき、プラグインをshell、service、factsに使用することもできます.
3.2、mcoによるカスタムfact_の使用apply 4=appのホストは1回変更して、環境をtestingにすることを要求して、モードはnoopです
まず、このカスタムfactを備えたホストを確認します.使用するプラグインはfind、inventoryです.
次に要求通りに変更すればよいが,使用したプラグインはpuppet,factsである.
変更が完了したら、ノードの動作状況をすばやく確認し、使用したプラグインはpuppet [root@linuxmaster1poc ~]# mco puppet status
3.3、リモートですべてのシステムをRHEL 6.4ホストrootのパスワードに変更し、使用したプラグインはshell、facts
3.4、すべてのノードpuppetとfacterインストールパッケージのバージョン情報を表示し、使用したプラグインはpackageである
その他の機能は、以下の方法で表示できます.
2、mcollective各種pluginsを組み合わせて各種任務の組み合わせを完成する
2.1.停止オペレーティングシステムがRHEL 5.xサーバーのcrondタスク
まず5.xシステムcrondの状態を確認し、プラグインサービス、factsを使用します.
次にサービスプラグインでサービスを停止し、プラグインサービス、factsを使用します.
フィルタリングされたホストcrondサービスが停止しているかどうかを再確認し、プラグインサービス、factsを使用します.
shellプラグインで実現することもでき、プラグインをshell、service、factsに使用することもできます.
2.2、mcoによるカスタムfact_の使用apply 4=appのホストは1回変更して、環境をtestingにすることを要求して、モードはnoopです
まず、このカスタムfactを備えたホストを確認します.使用するプラグインはfind、inventoryです.
次に要求通りに変更すればよいが,使用したプラグインはpuppet,factsである.
変更が完了したら、ノードの動作状況をすばやく確認し、使用したプラグインはpuppet [root@linuxmaster1poc ~]# mco puppet status
3、リモートですべてのシステムをRHEL 6.4ホストrootのパスワードに変更し、使用したプラグインはshell、facts
4、すべてのノードpuppetとfacterインストールパッケージのバージョン情報を表示し、使用したプラグインはpackageである
その他の機能は、以下の方法で表示できます.
ホームに戻る
コミュニケーション:
微信公衆番号:puppet 2014、微信検索加入可能、以下のQRコードをスキャンして加入可能
微信公衆番号
QQ交流群:296934942
MCollectiveはただのフレームワークであり、上で様々な役割を果たす必要がある場合は、さまざまなプラグインのサポートが必要です.公式には多くのプラグインが提供されていますが、このほかにもshellプラグインなどサードパーティ製のプラグインがあります.以下では、さまざまなプラグインのインストールと、プラグイン間の組み合わせについて説明します.
1、mcollective client側とserver側に各種公式サイトpluginsを設置する
まず各プラグインを公式サイトにダウンロードしますhttp://yum.puppetlabs.com
1.1 collective-clientエンドのダウンロード
[root@linuxmaster1poc ~]# rpm -qa | grep mco
mcollective-service-common-3.1.2-1.noarch
mcollective-client-2.2.4-1.el6.noarch
mcollective-service-client-3.1.2-1.noarch
mcollective-common-2.2.4-1.el6.noarch
mcollective-iptables-common-3.0.1-1.noarch
mcollective-filemgr-client-1.0.1-1.noarch
mcollective-nrpe-client-3.0.2-1.noarch
mcollective-puppet-client-1.6.0-1.noarch
mcollective-nrpe-common-3.0.2-1.noarch
mcollective-filemgr-common-1.0.1-1.noarch
mcollective-iptables-client-3.0.1-1.noarch
mcollective-puppet-common-1.6.0-1.noarch
mcollective-facter-facts-1.0.0-1.noarch
mcollective-package-client-4.2.0-1.noarch
mcollective-package-common-4.2.0-1.noarch
1.2 mcollecitve-serverエンドのダウンロード
[root@linux57poc ~]# rpm -qa | grep mco
mcollective-nrpe-common-3.0.2-1
mcollective-puppet-common-1.6.0-1
mcollective-iptables-common-3.0.1-1
mcollective-iptables-agent-3.0.1-1
mcollective-2.2.4-1.el5
mcollective-package-common-4.2.0-1
mcollective-service-common-3.1.2-1
mcollective-service-agent-3.1.2-1
mcollective-puppet-agent-1.6.0-1
mcollective-package-agent-4.2.0-1
mcollective-filemgr-common-1.0.1-1
mcollective-common-2.2.4-1.el5
mcollective-facter-facts-1.0.0-1
mcollective-filemgr-agent-1.0.1-1
mcollective-nrpe-agent-3.0.2-1
以上のインストールはpackageモジュールで実行できます.以下はmcollective server側のみです.インストールが完了したら、サービスを再起動してください.サービスモジュールを書いたら自動的にリフレッシュできます.
1.3 plugins.ppの作成
class mcollective::plugins{
include mcollective::plugins_puppet,
mcollective::plugins_facter,
mcollective::plugins_filemgr,
mcollective::plugins_iptables,
# mcollective::plugins_nettest, # ruby-net-ping,
mcollective::plugins_nrpe,
mcollective::plugins_package,
mcollective::plugins_service
}
#mco-client need install mcollective-puppet-client and mcollective-puppet-common
class mcollective::plugins_puppet{
package { ['mcollective-puppet-agent','mcollective-puppet-common']:
ensure => installed,
require => Class["mcollective::install"]
}
}
#mco-client need install mcollective-facter-facts
class mcollective::plugins_facter{
package { 'mcollective-facter-facts':
ensure => installed,
require => Class["mcollective::install"]
}
}
#mco-client need install mcollective-filemgr-client and mcollective-filemgr-common
class mcollective::plugins_filemgr{
package { ['mcollective-filemgr-agent','mcollective-filemgr-common']:
ensure => installed,
require => Class["mcollective::install"]
}
}
#mco-client need install mcollective-iptables-client and mcollective-iptables-common
class mcollective::plugins_iptables{
package { ['mcollective-iptables-agent','mcollective-iptables-common']:
ensure => installed,
require => Class["mcollective::install"]
}
}
#mco-client need install mcollective-nettest-client and mcollective-nettest-common
class mcollective::plugins_nettest{
package { ['mcollective-nettest-agent','mcollective-nettest-common']:
ensure => installed,
require => Class["mcollective::install"]
}
}
#mco-client need install mcollective-nrpe-client and mcollective-nrpe-common
class mcollective::plugins_nrpe{
package { ['mcollective-nrpe-agent','mcollective-nrpe-common']:
ensure => installed,
require => Class["mcollective::install"]
}
}
#mco-client need install mcollective-package-client and mcollective-package-common
class mcollective::plugins_package{
package { ['mcollective-package-agent','mcollective-package-common']:
ensure => installed,
require => Class["mcollective::install"]
}
}
#mco-client need install mcollective-service-client and mcollective-service-common
class mcollective::plugins_service{
package { ['mcollective-service-agent','mcollective-service-common']:
ensure => installed,
require => Class["mcollective::install"]
}
}
1.4 conf.ppの作成
class mcollective::service{
service { 'mcollective':
ensure => running,
hasstatus => true,
hasrestart => true,
enable => true,
subscribe => Class['mcollective::config'],
}
}
1.5 mcollective-clientエンドがインストールされたら、mcoコマンドで表示できます.
[root@linuxmaster1poc ~]# mco
The Marionette Collective version 2.2.4
usage: /usr/bin/mco command
Known commands:
completion facts filemgr
find help inventory
iptables nrpe package
ping plugin puppet
rpc service shell
Type '/usr/bin/mco help' for a detailed list of commands and '/usr/bin/mco help command'
to get detailed help for a command
1.6 mcollective-serverエンドがインストールされたら、mco-clientエンドで表示できます.
[root@linuxmaster1poc ~]# mco inventory linux57poc
Inventory for linux57poc:
Server Statistics:
Version: 2.2.4
Start Time: Fri Dec 13 08:15:46 +0800 2013
Config File: /etc/mcollective/server.cfg
Collectives: mcollective
Main Collective: mcollective
Process ID: 23268
Total Messages: 16
Messages Passed Filters: 16
Messages Filtered: 0
Expired Messages: 0
Replies Sent: 15
Total Processor Time: 0.71 seconds
System Time: 0.15 seconds
Agents: #
discovery filemgr nrpe
package puppet rpcutil
service shell
Data Plugins:
agent fstat nrpe
puppet resource service
Configuration Management Classes:
No classes applied
Facts:
architecture => x86_64
augeasversion => 0.10.0
bios_release_date => 06/22/2012
bios_vendor => Phoenix Technologies LTD
bios_version => 6.00
blockdevice_fd0_size => 4096
blockdevice_hdc_size => 3834736640
。。。
注意:次に、さまざまなコマンドの操作の組み合わせをテストします.ここでは、いくつかの例を挙げます.詳細は、helpまたは公式サイトを参照してください.
2、shellプラグインのインストール
プラグインのダウンロード先:https://github.com/kisspuppet/mcollective-plugins、githubクライアントの子供靴が直接cloneできますhttps://github.com/kisspuppet/mcollective-plugins.git
2.1、ダウンロードプラグインは対応するディレクトリに入ればよい
mcollective-client
[root@linuxmaster1poc ~]# ll /usr/libexec/mcollective/mcollective/application/ | grep shell
-rw-r--r-- 1 root root 1601 Aug 6 06:36 shell.rb
[root@linuxmaster1poc ~]# ll /usr/libexec/mcollective/mcollective/agent/ | grep shell
-rw-r--r-- 1 root root 1017 Aug 6 06:36 shell.ddl
-rw-r--r-- 1 root root 862 Aug 6 06:36 shell.rb
mcollective-server
[root@linux57poc agent]# ll /usr/libexec/mcollective/mcollective/agent/ | grep shell
-rw-r--r-- 1 root root 1017 Aug 6 06:36 shell.ddl
-rw-r--r-- 1 root root 862 Aug 6 06:36 shell.rb
メモ:mcollective-serverエンドの導入が完了したら、mcollectiveサービスを再起動してください.
2.2、shellプラグインが正常にロードされたかどうかを確認する
mcollective-clientエンドshellプラグインがすでに存在することがわかります
[root@linuxmaster1poc ~]# mco The Marionette Collective version 2.2.4 usage: /usr/bin/mco command Known commands: completion facts find
help inventory ping
plugin puppet rpc
shell #shell OK
Type '/usr/bin/mco help' for a detailed list of commands and '/usr/bin/mco help command' to get detailed help for a command
mcollective-serverエンドshellプラグインもロードされていることがわかります
[root@linuxmaster1poc ~]# mco inventory linux57poc
Inventory for linux57poc:
Server Statistics:
Version: 2.2.4
Start Time: Fri Dec 13 01:14:14 +0800 2013
Config File: /etc/mcollective/server.cfg
Collectives: mcollective
Main Collective: mcollective
Process ID: 23898
Total Messages: 10
Messages Passed Filters: 10
Messages Filtered: 0
Expired Messages: 0
Replies Sent: 9
Total Processor Time: 0.73 seconds
System Time: 0.17 seconds
Agents:
discovery puppet rpcutil
shell #shell OK
Data Plugins:
agent fstat puppet
resource
Configuration Management Classes:
No classes applied
Facts:
architecture => x86_64
augeasversion => 0.10.0
bios_release_date => 06/22/2012
bios_vendor => Phoenix Technologies LTD
bios_version => 6.00
blockdevice_fd0_size => 4096
blockdevice_hdc_size => 3834736640
blockdevice_sda_model => Virtual disk
blockdevice_sda_size => 42949672960
。。。
2.3.shellプラグインによるshellコマンドの実行
mco shell
[root@linuxmaster1poc ~]# mco shell --help
MCollective Distributed Shell
Usage: mco shell
The CMD is a string
EXAMPLES:
mco shell uptime
--np, --no-progress Do not show the progress bar
-1, --one Send request to only one discovered nodes
--batch SIZE Do requests in batches
--batch-sleep SECONDS Sleep time between batches
--limit-seed NUMBER Seed value for deterministic random batching
--limit-nodes, --ln, --limit COUNT
Send request to only a subset of nodes, can be a percentage
-j, --json Produce JSON output
--display MODE Influence how results are displayed. One of ok, all or failed
-c, --config FILE Load configuratuion from file rather than default
-v, --verbose Be verbose
-h, --help Display this screen
Common Options
-T, --target COLLECTIVE Target messages to a specific sub collective
--dt, --discovery-timeout SECONDS
Timeout for doing discovery
-t, --timeout SECONDS Timeout for calling remote agents
-q, --quiet Do not be verbose
--ttl TTL Set the message validity period
--reply-to TARGET Set a custom target for replies
--dm, --disc-method METHOD Which discovery method to use
--do, --disc-option OPTION Options to pass to the discovery method
--nodes FILE List of nodes to address
Host Filters
-W, --with FILTER Combined classes and facts filter
-S, --select FILTER Compound filter combining facts and classes
-F, --wf, --with-fact fact=val Match hosts with a certain fact
-C, --wc, --with-class CLASS Match hosts with a certain config management class
-A, --wa, --with-agent AGENT Match hosts with a certain agent
-I, --wi, --with-identity IDENT Match hosts with a certain configured identity
The Marionette Collective 2.2.4
対端uptimeコマンド負荷の表示
[root@linuxmaster1poc ~]# mco shell "uptime"
Do you really want to send this command unfiltered? (y/n): y
Discovering hosts using the mc method for 2 second(s) .... 3
Host: linux58poc
Statuscode: 0
Output:
02:45:02 up 21:10, 2 users, load average: 0.00, 0.00, 0.00
Host: linux64poc
Statuscode: 0
Output:
02:45:02 up 20:59, 1 user, load average: 0.00, 0.00, 0.00
Host: linux57poc
Statuscode: 0
Output:
02:45:02 up 21:04, 3 users, load average: 0.00, 0.00, 0.00
すべてのノード/etc/passwordファイルのpuppetユーザーの行を表示
[root@linuxmaster1poc ~]# mco shell "cat /etc/passwd | grep puppet"
Do you really want to send this command unfiltered? (y/n): y
Discovering hosts using the mc method for 2 second(s) .... 3
Host: linux58poc
Statuscode: 0
Output:
puppet:x:52:52:Puppet:/var/lib/puppet:/sbin/nologin
Host: linux64poc
Statuscode: 0
Output:
puppet:x:52:52:Puppet:/var/lib/puppet:/sbin/nologin
Host: linux57poc
Statuscode: 0
Output:
puppet:x:52:52:Puppet:/var/lib/puppet:/sbin/nologin
ホストのrootパスワードを変更
[root@linuxmaster1poc ~]# mco shell "echo redhat | passwd root --stdin" -I linux57poc
Host: linux57poc
Statuscode: 0
Output:
Changing password for user root.
passwd: all authentication tokens updated successfully.
メモ:詳細な手順は、mco shell--helpヘルプを参照してください.
警告:mcollectiveベースのshellプラグインは強力ですが、ダイナミック表示のコマンド以外はrootで操作できます.基本的には操作できます.従って、操作も非常に危険であり、生産環境の実情に応じて決定することができる.
注意:次に、さまざまなコマンドの操作の組み合わせをテストします.ここでは、いくつかの例を挙げます.詳細は、helpまたは公式サイトを参照してください.
3、mcollective各種pluginsを組み合わせて各種任務の組み合わせを完成する
3.1、オペレーティングシステムがRHEL 5.xサーバーであるcrondタスクを停止する
まず5.xシステムcrondの状態を確認し、プラグインサービス、factsを使用します.
[root@linuxmaster1poc ~]# mco service crond status -F operatingsystemmajrelease=5
* [ ============================================================> ] 2 / 2
linux57poc: running
linux58poc: running
Summary of Service Status:
running = 2
Finished processing 2 / 2 hosts in 184.79 ms
次にサービスプラグインでサービスを停止し、プラグインサービス、factsを使用します.
[root@linuxmaster1poc ~]# mco service crond stop -F operatingsystemmajrelease=5
* [ ============================================================> ] 2 / 2
Summary of Service Status:
stopped = 2
Finished processing 2 / 2 hosts in 914.76 ms
フィルタリングされたホストcrondサービスが停止しているかどうかを再確認し、プラグインサービス、factsを使用します.
[root@linuxmaster1poc ~]# mco service crond status -F operatingsystemmajrelease=5
* [ ============================================================> ] 2 / 2
linux57poc: stopped
linux58poc: stopped
Summary of Service Status:
stopped = 2
Finished processing 2 / 2 hosts in 125.87 ms
shellプラグインで実現することもでき、プラグインをshell、service、factsに使用することもできます.
[root@linuxmaster1poc ~]# mco shell "service crond status" -F operatingsystemmajrelease=5
Discovering hosts using the mc method for 2 second(s) .... 2
Host: linux57poc
Statuscode: 3
Output:
crond is stopped
Host: linux58poc
Statuscode: 3
Output:
crond is stopped
3.2、mcoによるカスタムfact_の使用apply 4=appのホストは1回変更して、環境をtestingにすることを要求して、モードはnoopです
まず、このカスタムfactを備えたホストを確認します.使用するプラグインはfind、inventoryです.
[root@linuxmaster1poc ~]# for i in `mco find` ; do echo $i; mco inventory $i | grep fact_apply4; done
linux58poc
fact_apply4 => app
linux57poc
linux64poc
fact_apply4 => app
次に要求通りに変更すればよいが,使用したプラグインはpuppet,factsである.
[root@linuxmaster1poc ~]# mco puppet -v runonce --environment=testing --noop -F fact_apply4=app
Discovering hosts using the mc method for 2 second(s) .... 2
* [ ============================================================> ] 2 / 2
linux64poc : OK
{:summary=> "Started a background Puppet run using the 'puppet agent --onetime --daemonize --color=false --splay --splaylimit 30 --noop --environment testing' command"}
linux58poc : OK
{:summary=> "Started a background Puppet run using the 'puppet agent --onetime --daemonize --color=false --splay --splaylimit 30 --noop --environment testing' command"}
---- rpc stats ----
Nodes: 2 / 2
Pass / Fail: 2 / 0
Start Time: Fri Dec 13 09:10:50 +0800 2013
Discovery Time: 2003.32ms
Agent Time: 884.34ms
Total Time: 2887.67ms
変更が完了したら、ノードの動作状況をすばやく確認し、使用したプラグインはpuppet [root@linuxmaster1poc ~]# mco puppet status
* [ ============================================================> ] 3 / 3
linux64poc: Currently idling; last completed run 54 seconds ago
linux58poc: Currently applying a catalog; last completed run 1 minutes 12 seconds ago
linux57poc: Currently stopped; last completed run 22 minutes 57 seconds ago
Summary of Applying:
false = 2
true = 1
Summary of Daemon Running:
running = 2
stopped = 1
Summary of Enabled:
enabled = 3
Summary of Idling:
false = 2
true = 1
Summary of Status:
idling = 1
stopped = 1
applying a catalog = 1
Finished processing 3 / 3 hosts in 263.72 ms
3.3、リモートですべてのシステムをRHEL 6.4ホストrootのパスワードに変更し、使用したプラグインはshell、facts
[root@linuxmaster1poc ~]# mco shell "echo redhat | passwd root --stdin" -F operatingsystemrelease=6.4
Discovering hosts using the mc method for 2 second(s) .... 1
Host: linux64poc
Statuscode: 0
Output:
Changing password for user root.
passwd: all authentication tokens updated successfully.
3.4、すべてのノードpuppetとfacterインストールパッケージのバージョン情報を表示し、使用したプラグインはpackageである
[root@linuxmaster1poc ~]# mco package status puppet
* [ ============================================================> ] 3 / 3
linux64poc: puppet-2.7.23-1.el6.noarch
linux57poc: puppet-2.7.23-1.el5.noarch
linux58poc: puppet-2.7.23-1.el5.noarch
Summary of Arch:
noarch = 3
Summary of Ensure:
2.7.23-1.el5 = 2
2.7.23-1.el6 = 1
Finished processing 3 / 3 hosts in 635.21 ms
[root@linuxmaster1poc ~]# mco package status facter
* [ ============================================================> ] 3 / 3
linux58poc: facter-1.7.3-1.el5.x86_64
linux64poc: facter-1.7.3-1.el6.x86_64
linux57poc: facter-1.7.3-1.el5.x86_64
Summary of Arch:
x86_64 = 3
Summary of Ensure:
1.7.3-1.el5 = 2
1.7.3-1.el6 = 1
Finished processing 3 / 3 hosts in 124.99 ms
その他の機能は、以下の方法で表示できます.
[root@linuxmaster1poc ~]# mco puppet -h
Schedule runs, enable, disable and interrogate the Puppet Agent
Usage: mco puppet [OPTIONS] [FILTERS] [CONCURRENCY|MESSAGE]
Usage: mco puppet
Usage: mco puppet disable [message]
Usage: mco puppet runonce [PUPPET OPTIONS]
Usage: mco puppet resource type name property1=value property2=value
Usage: mco puppet runall [--rerun SECONDS] [PUPPET OPTIONS]
The ACTION can be one of the following:
count - return a total count of running, enabled, and disabled nodes
enable - enable the Puppet Agent if it was previously disabled
disable - disable the Puppet Agent preventing catalog from being applied
resource - manage individual resources using the Puppet Type (RAL) system
runall - invoke a puppet run on matching nodes, making sure to only run
CONCURRENCY nodes at a time
runonce - invoke a Puppet run on matching nodes
status - shows a short summary about each Puppet Agent status
summary - shows resource and run time summaries
--force Bypass splay options when running
--server SERVER Connect to a specific server or port
--tags, --tag TAG Restrict the run to specific tags
--noop Do a noop run
--no-noop Do a run with noop disabled
--environment ENVIRONMENT Place the node in a specific environment for this run
--splay Splay the run by up to splaylimit seconds
--no-splay Do a run with splay disabled
--splaylimit SECONDS Maximum splay time for this run if splay is set
--ignoreschedules Disable schedule processing
--rerun SECONDS When performing runall do so repeatedly with a minimum run time of SECONDS
--np, --no-progress Do not show the progress bar
-1, --one Send request to only one discovered nodes
--batch SIZE Do requests in batches
--batch-sleep SECONDS Sleep time between batches
--limit-seed NUMBER Seed value for deterministic random batching
--limit-nodes, --ln, --limit COUNT
Send request to only a subset of nodes, can be a percentage
-j, --json Produce JSON output
--display MODE Influence how results are displayed. One of ok, all or failed
-c, --config FILE Load configuratuion from file rather than default
-v, --verbose Be verbose
-h, --help Display this screen
Common Options
-T, --target COLLECTIVE Target messages to a specific sub collective
--dt, --discovery-timeout SECONDS
Timeout for doing discovery
-t, --timeout SECONDS Timeout for calling remote agents
-q, --quiet Do not be verbose
--ttl TTL Set the message validity period
--reply-to TARGET Set a custom target for replies
--dm, --disc-method METHOD Which discovery method to use
--do, --disc-option OPTION Options to pass to the discovery method
--nodes FILE List of nodes to address
Host Filters
-W, --with FILTER Combined classes and facts filter
-S, --select FILTER Compound filter combining facts and classes
-F, --wf, --with-fact fact=val Match hosts with a certain fact
-C, --wc, --with-class CLASS Match hosts with a certain config management class
-A, --wa, --with-agent AGENT Match hosts with a certain agent
-I, --wi, --with-identity IDENT Match hosts with a certain configured identity
The Marionette Collective 2.2.4
2、mcollective各種pluginsを組み合わせて各種任務の組み合わせを完成する
2.1.停止オペレーティングシステムがRHEL 5.xサーバーのcrondタスク
まず5.xシステムcrondの状態を確認し、プラグインサービス、factsを使用します.
[root@linuxmaster1poc ~]# mco service crond status -F operatingsystemmajrelease=5
* [ ============================================================> ] 2 / 2
linux57poc: running
linux58poc: running
Summary of Service Status:
running = 2
Finished processing 2 / 2 hosts in 184.79 ms
次にサービスプラグインでサービスを停止し、プラグインサービス、factsを使用します.
[root@linuxmaster1poc ~]# mco service crond stop -F operatingsystemmajrelease=5
* [ ============================================================> ] 2 / 2
Summary of Service Status:
stopped = 2
Finished processing 2 / 2 hosts in 914.76 ms
フィルタリングされたホストcrondサービスが停止しているかどうかを再確認し、プラグインサービス、factsを使用します.
[root@linuxmaster1poc ~]# mco service crond status -F operatingsystemmajrelease=5
* [ ============================================================> ] 2 / 2
linux57poc: stopped
linux58poc: stopped
Summary of Service Status:
stopped = 2
Finished processing 2 / 2 hosts in 125.87 ms
shellプラグインで実現することもでき、プラグインをshell、service、factsに使用することもできます.
[root@linuxmaster1poc ~]# mco shell "service crond status" -F operatingsystemmajrelease=5
Discovering hosts using the mc method for 2 second(s) .... 2
Host: linux57poc
Statuscode: 3
Output:
crond is stopped
Host: linux58poc
Statuscode: 3
Output:
crond is stopped
2.2、mcoによるカスタムfact_の使用apply 4=appのホストは1回変更して、環境をtestingにすることを要求して、モードはnoopです
まず、このカスタムfactを備えたホストを確認します.使用するプラグインはfind、inventoryです.
[root@linuxmaster1poc ~]# for i in `mco find` ; do echo $i; mco inventory $i | grep fact_apply4; done
linux58poc
fact_apply4 => app
linux57poc
linux64poc
fact_apply4 => app
次に要求通りに変更すればよいが,使用したプラグインはpuppet,factsである.
[root@linuxmaster1poc ~]# mco puppet -v runonce --environment=testing --noop -F fact_apply4=app
Discovering hosts using the mc method for 2 second(s) .... 2
* [ ============================================================> ] 2 / 2
linux64poc : OK
{:summary=> "Started a background Puppet run using the 'puppet agent --onetime --daemonize --color=false --splay --splaylimit 30 --noop --environment testing' command"}
linux58poc : OK
{:summary=> "Started a background Puppet run using the 'puppet agent --onetime --daemonize --color=false --splay --splaylimit 30 --noop --environment testing' command"}
---- rpc stats ----
Nodes: 2 / 2
Pass / Fail: 2 / 0
Start Time: Fri Dec 13 09:10:50 +0800 2013
Discovery Time: 2003.32ms
Agent Time: 884.34ms
Total Time: 2887.67ms
変更が完了したら、ノードの動作状況をすばやく確認し、使用したプラグインはpuppet [root@linuxmaster1poc ~]# mco puppet status
* [ ============================================================> ] 3 / 3
linux64poc: Currently idling; last completed run 54 seconds ago
linux58poc: Currently applying a catalog; last completed run 1 minutes 12 seconds ago
linux57poc: Currently stopped; last completed run 22 minutes 57 seconds ago
Summary of Applying:
false = 2
true = 1
Summary of Daemon Running:
running = 2
stopped = 1
Summary of Enabled:
enabled = 3
Summary of Idling:
false = 2
true = 1
Summary of Status:
idling = 1
stopped = 1
applying a catalog = 1
Finished processing 3 / 3 hosts in 263.72 ms
3、リモートですべてのシステムをRHEL 6.4ホストrootのパスワードに変更し、使用したプラグインはshell、facts
[root@linuxmaster1poc ~]# mco shell "echo redhat | passwd root --stdin" -F operatingsystemrelease=6.4
Discovering hosts using the mc method for 2 second(s) .... 1
Host: linux64poc
Statuscode: 0
Output:
Changing password for user root.
passwd: all authentication tokens updated successfully.
4、すべてのノードpuppetとfacterインストールパッケージのバージョン情報を表示し、使用したプラグインはpackageである
[root@linuxmaster1poc ~]# mco package status puppet
* [ ============================================================> ] 3 / 3
linux64poc: puppet-2.7.23-1.el6.noarch
linux57poc: puppet-2.7.23-1.el5.noarch
linux58poc: puppet-2.7.23-1.el5.noarch
Summary of Arch:
noarch = 3
Summary of Ensure:
2.7.23-1.el5 = 2
2.7.23-1.el6 = 1
Finished processing 3 / 3 hosts in 635.21 ms
[root@linuxmaster1poc ~]# mco package status facter
* [ ============================================================> ] 3 / 3
linux58poc: facter-1.7.3-1.el5.x86_64
linux64poc: facter-1.7.3-1.el6.x86_64
linux57poc: facter-1.7.3-1.el5.x86_64
Summary of Arch:
x86_64 = 3
Summary of Ensure:
1.7.3-1.el5 = 2
1.7.3-1.el6 = 1
Finished processing 3 / 3 hosts in 124.99 ms
その他の機能は、以下の方法で表示できます.
[root@linuxmaster1poc ~]# mco puppet -h
Schedule runs, enable, disable and interrogate the Puppet Agent
Usage: mco puppet [OPTIONS] [FILTERS] [CONCURRENCY|MESSAGE]
Usage: mco puppet
Usage: mco puppet disable [message]
Usage: mco puppet runonce [PUPPET OPTIONS]
Usage: mco puppet resource type name property1=value property2=value
Usage: mco puppet runall [--rerun SECONDS] [PUPPET OPTIONS]
The ACTION can be one of the following:
count - return a total count of running, enabled, and disabled nodes
enable - enable the Puppet Agent if it was previously disabled
disable - disable the Puppet Agent preventing catalog from being applied
resource - manage individual resources using the Puppet Type (RAL) system
runall - invoke a puppet run on matching nodes, making sure to only run
CONCURRENCY nodes at a time
runonce - invoke a Puppet run on matching nodes
status - shows a short summary about each Puppet Agent status
summary - shows resource and run time summaries
--force Bypass splay options when running
--server SERVER Connect to a specific server or port
--tags, --tag TAG Restrict the run to specific tags
--noop Do a noop run
--no-noop Do a run with noop disabled
--environment ENVIRONMENT Place the node in a specific environment for this run
--splay Splay the run by up to splaylimit seconds
--no-splay Do a run with splay disabled
--splaylimit SECONDS Maximum splay time for this run if splay is set
--ignoreschedules Disable schedule processing
--rerun SECONDS When performing runall do so repeatedly with a minimum run time of SECONDS
--np, --no-progress Do not show the progress bar
-1, --one Send request to only one discovered nodes
--batch SIZE Do requests in batches
--batch-sleep SECONDS Sleep time between batches
--limit-seed NUMBER Seed value for deterministic random batching
--limit-nodes, --ln, --limit COUNT
Send request to only a subset of nodes, can be a percentage
-j, --json Produce JSON output
--display MODE Influence how results are displayed. One of ok, all or failed
-c, --config FILE Load configuratuion from file rather than default
-v, --verbose Be verbose
-h, --help Display this screen
Common Options
-T, --target COLLECTIVE Target messages to a specific sub collective
--dt, --discovery-timeout SECONDS
Timeout for doing discovery
-t, --timeout SECONDS Timeout for calling remote agents
-q, --quiet Do not be verbose
--ttl TTL Set the message validity period
--reply-to TARGET Set a custom target for replies
--dm, --disc-method METHOD Which discovery method to use
--do, --disc-option OPTION Options to pass to the discovery method
--nodes FILE List of nodes to address
Host Filters
-W, --with FILTER Combined classes and facts filter
-S, --select FILTER Compound filter combining facts and classes
-F, --wf, --with-fact fact=val Match hosts with a certain fact
-C, --wc, --with-class CLASS Match hosts with a certain config management class
-A, --wa, --with-agent AGENT Match hosts with a certain agent
-I, --wi, --with-identity IDENT Match hosts with a certain configured identity
The Marionette Collective 2.2.4
ホームに戻る
コミュニケーション:
微信公衆番号:puppet 2014、微信検索加入可能、以下のQRコードをスキャンして加入可能
微信公衆番号
QQ交流群:296934942