WAITEVENT buffer busy waits Reference Note
9738 ワード
[@more@]
This is a reference note for the wait event
"buffer busy waits"
which includes the following subsections:
See Note:61998.1
for an introduction to Wait Events.
Definition:
Versions:7.0 - 10.2
Documentation: 9.0This wait happens when a session wants to access a database block in the buffer cache but it cannot as the buffer is "busy". The two main cases where this can occur are:
Individual Waits:
Parameters:
P1 = file# (Absolute File# in Oracle8 onwards)P2 = block#P3 = id (Reason Code)/Block Class# in 10g file# (Absolute File# in Oracle8 onwards)
This is the file number of the data file that contains the block that the waiting session wants.
block#
This is the block number in the above
file# that the waiting session wants access to.
See Note:181306.1 to determine the tablespace, filename and object for this file#,block# pair.
id (Reason Code)
The buffer busy wait event is called from different places in the Oracle code. Each place in the code uses a different "Reason Code". These codes can differ between versions thus:
Versions
Values used7.1 - 8.0.6Uses one set of ID codes (mostly >1000)8.1.58.1.5 does not include a value for
P3 when waiting8.1.6 - 9.2Uses a different set of ID codes (100-300)10.1+Uses the block class
Buffer Busy Waits ID's and Meanings
Reason Code (Id)
Reason
<=8.0.6
8.1.6-9.2
>=10.100n/aA block is being read1003100n/aWe want to NEW the block but the block is currently being read by another session (most likely for undo).1007200n/aWe want to NEW the block but someone else has is using the current copy so we have to wait for them to finish.1010230n/aTrying to get a buffer in CR/CRX mode , but a modification has started on the buffer that has not yet been completed.1012-n/aA modification is happening on a SCUR or XCUR buffer, but has not yet completed1012 (dup.)231n/aCR/CRX scan found the CURRENT block, but a modification has started on the buffer that has not yet been completed.1013130n/aBlock is being read by another session and no other suitable block image was found e.g. CR version, so we wait until the read is completed. This may also occur after a buffer cache assumed deadlock. The kernel can't get a buffer in a certain amount of time and assumes a deadlock. Therefore it will read the CR version of the block. This should not have a negative impact on performance, and basically replaces a read from disk with a wait for another process to read it from disk, as the block needs to be read one way or another.1014110n/aWe want the CURRENT block either shared or exclusive but the Block is being read into cache by another session, so we have to wait until their read() is completed.1014 (duplicate)120n/aWe want to get the block in current mode but someone else is currently reading it into the cache. Wait for them to complete the read. This occurs during buffer lookup.1016210n/aThe session wants the block in SCUR or XCUR mode. If this is a buffer exchange or the session is in discrete TX mode, the session waits for the first time and the second time escalates the block as a deadlock and so does not show up as waiting very long. In this case the statistic: "exchange deadlocks"is incremented and we yield the CPU for the "buffer deadlock"wait event.1016 (duplicate)220n/aDuring buffer lookup for a CURRENT copy of a buffer we have found the buffer but someone holds it in an incompatible mode so we have to wait.
Wait Time:
Normal wait time is 1 second. If the session has been waiting for an exclusive buffer during the last wait then it waits 3 seconds this wait. The session will keep timing-out/waiting until it acquires the buffer.
Finding Blockers:
Finding the blocking process can be quite difficult as the information required is not externalised. If
P3 (Reason Code) shows that the "buffer busy wait"is waiting for a block read to complete then the blocking session is likely to be waiting on an IO wait (eg: "db file sequential read"or "db file scattered read") for the same
file# and
block#.
If the wait is due to the buffer being held in an incompatible mode then it should be freed very soon. If not then it is advisable to contact Oracle Support and get 3 SYSTEMSTATE dumps at one minute intervals as the blocking session may be spinning. (Look for ACTIVE sessions with high CPU utilisation).
Systemwide Waits:
If the TIME spent waiting for buffers is significant then it is best to determine which segment/s is/are suffering from contention. The "Buffer busy wait statistics"section of the Bstat/estat or STATSPACK reports shows which block type/s are seeing the most contention. This information is derived from <> which can be queried in isolation: SELECT time, count, class
FROM V$WAITSTAT
ORDER BY time,count
;
This shows the
class of block with the most waits at the BOTTOM of the list.
Oracle Support may also request that the following query be run to show where the block is held from when a wait occurs: SELECT kcbwhdes, why0+why1+why2 "Gets", "OTHER_WAIT"
FROM x$kcbsw s, x$kcbwh w
WHERE s.indx=w.indx
and s."OTHER_WAIT">0
ORDER BY 3
;
Note: "OTHER_WAIT" is "OTHER WAIT" in Oracle8i (a space rather than an underscore)
Additional information regarding which files contain the blocks being waited for can be obtained from the internal <> thus: SELECT count, file#, name
FROM x$kcbfwait, v$datafile
WHERE indx + 1 = file#
ORDER BY count
;
This shows the file/s with the most waits (at the BOTTOM of the list) so by combining the above of information we know what block type/s in which file/s are causing waits. The segments in each file can be seen using a query like: SELECT distinct owner, segment_name, segment_type
FROM dba_extents
WHERE file_id=
If there are a large number of segments of the type listed then monitoring <> may help isolate which object is causing the waits.
Eg: Repeatedly run the following statement and collect the output. After a period of time sort the results to see which file & blocks are showing contention: SELECT p1 "File", p2 "Block", p3 "Reason"
FROM v$session_wait
WHERE event='buffer busy waits'
;
Note:
In the above query there is no reference to WAIT_TIME as you are not interested in whether a session is currently waiting or not, just what buffers are causing waits.
If a particular block or range of blocks keep showing waits you can try to isolate the object using the queries in Note:181306.1.
One can also look at: Capturing session trace and noting the "buffer busy waits"may help - See Note:62160.1.
Reducing Waits / Wait times:
As buffer busy waits are due to contention for particular blocks then you cannot take any action until you know which blocks are being competed for and why. Eliminating the cause of the contention is the best option. Note that "buffer busy waits"for data blocks are often due to several processes repeatedly reading the same blocks (eg: if lots of people scan the same index) - the first session processes the blocks that are in the buffer cache quickly but then a block has to be read from disk - the other sessions (scanning the same index) quickly 'catch up' and want the block which is currently being read from disk - they wait for the buffer as someone is already reading the block in.
The following hints may be useful for particular types of contention - these are things that MAY reduce contention for particular situations:
Block TypePossible Actionsdata blocksEliminate HOT blocks from the application. Check for repeatedly scanned/unselective indexes. Change PCTFREE and/or PCTUSED. Check for 'right- hand-indexes' (indexes that get inserted into at the same point by many processes). Increase INITRANS. Reduce the number of rows per block.segment headerIncrease of number of FREELISTs. Use FREELIST GROUPs (even in single instance this can make a difference).freelist blocksAdd more FREELISTS. In case of Parallel Server make sure that each instance has its own FREELIST GROUP(s).undo headerAdd more rollback segments.
Related:
Bug can cause "buffer busy waits"and latch contention in 817/901 Note:176129.1
Tracing User sessions Note:62160.1
「ITPUBブログ」からのリンク:http://blog.itpub.net/110396/viewspace-1057147/ する がある は、 を してください.そうしないと、 を します.
:http://blog.itpub.net/110396/viewspace-1057147/