[Study Notes][001][gstreamer] memory
4450 ワード
gstreamerのbufferの概念の意味は非常に多く、よく研究して、gstreamerはbufferの定義について:本文highlightこれらの定義:
実例を結びつけて分析します.
Object Hierarchy GBoxed ╰── GstBuffer Includes #include Description Buffers are the basic unit of data transfer in GStreamer.
They contain the timing and offset along with other arbitrary metadata that is associated with the GstMemory blocks that the buffer contains.
Buffers are usually created with gst_buffer_new(). After a buffer has been created one will typically allocate memory for it and add it to the buffer. The following example creates a buffer that can hold a given video frame with a given width, height and bits per plane.
...
Alternatively, use gst_buffer_new_allocate() to
create
a buffer with preallocated data of a given size.
Buffers can contain a list of GstMemory objects.
You can retrieve how many memory objects with gst_buffer_n_memory() and you can get a pointer to memory with gst_buffer_peek_memory()
A buffer will usually have timestamps, and a duration, but neither of these are guaranteed (they may be set to GST_CLOCK_TIME_NONE). Whenever a meaningful value can be given for these, they should be set. The timestamps and duration are measured in nanoseconds (they are GstClockTime values). The buffer DTS refers to the timestamp when the buffer should be decoded and is usually monotonically increasing(単調に増加する).The buffer PTS refers to the timestamp when the buffer content should be presented to the user and is not always monotonically increasing. A buffer can also have one or both of a start and an end offset. These are media-type specific.
For video buffers, the start offset will generally be the frame number.
For audio buffers, it will be the number of samples produced so far.
For compressed data, it could be the byte offset in a source or destination file. Likewise, the end offset will be the offset of the end of the buffer.
These can only be meaningfully interpreted if you know the media type of the buffer (the preceding CAPS event). Either or both can be set to GST_BUFFER_OFFSET_NONE. gst_buffer_ref() is used to increase the refcount of a buffer. This must be done when you want to keep a handle to the buffer after pushing it to the next element. The buffer refcount determines the writability(書き込み可能))of the buffer,a buffer is only writable when the refcount is exactly 1,i.e.when the caller has the only reference to the buffer.To efficiently create a smaller buffer out of an existing one, you can use gst_buffer_copy_region(). This method tries to share the memory objects between the two buffers. If a plug-in wants to modify the buffer data or metadata in-place, it should first obtain a buffer that is safe to modify by using gst_buffer_make_writable(). This function is optimized so that a copy will only be made when it is necessary. Several flags of the buffer can be set and unset with the GST_BUFFER_FLAG_SET() and GST_BUFFER_FLAG_UNSET() macros. Use GST_BUFFER_FLAG_IS_SET() to test if a certain GstBufferFlags flag is set. Buffers can be efficiently merged into a larger buffer with gst_buffer_append(). Copying of memory will only be done when absolutely needed. Arbitrary extra metadata can be set on a buffer with gst_buffer_add_meta(). Metadata can be retrieved with gst_buffer_get_meta(). See also GstMeta An element should either unref the buffer or push it out on a src pad using gst_pad_push() (see GstPad). Buffers are usually freed by unreffing them with gst_buffer_unref(). When the refcount drops to 0, any memory and metadata pointed to by the buffer is unreffed as well. Buffers allocated from a GstBufferPool will be returned to the pool when the refcount drops to 0. The GstParentBufferMeta is a meta which can be attached to a GstBuffer to hold a reference to another buffer that is only released when the child GstBuffer is released. Typically, GstParentBufferMeta is used when the child buffer is directly using the GstMemory of the parent buffer, and wants to prevent the parent buffer from being returned to a buffer pool until the GstMemory is available for re-use. (Since 1.6)
実例を結びつけて分析します.
Object Hierarchy GBoxed ╰── GstBuffer Includes #include
They contain the timing and offset along with other arbitrary metadata that is associated with the GstMemory blocks that the buffer contains.
Buffers are usually created with gst_buffer_new(). After a buffer has been created one will typically allocate memory for it and add it to the buffer. The following example creates a buffer that can hold a given video frame with a given width, height and bits per plane.
GstBuffer *buffer;
GstMemory *memory;
gint size, width, height, bpp;
...
size = width * height * bpp;
buffer = gst_buffer_new ();
memory = gst_allocator_alloc (NULL, size, NULL);
gst_buffer_insert_memory (buffer, -1, memory);...
Alternatively, use gst_buffer_new_allocate() to
create
a buffer with preallocated data of a given size.
Buffers can contain a list of GstMemory objects.
You can retrieve how many memory objects with gst_buffer_n_memory() and you can get a pointer to memory with gst_buffer_peek_memory()
A buffer will usually have timestamps, and a duration, but neither of these are guaranteed (they may be set to GST_CLOCK_TIME_NONE). Whenever a meaningful value can be given for these, they should be set. The timestamps and duration are measured in nanoseconds (they are GstClockTime values). The buffer DTS refers to the timestamp when the buffer should be decoded and is usually monotonically increasing(単調に増加する).The buffer PTS refers to the timestamp when the buffer content should be presented to the user and is not always monotonically increasing. A buffer can also have one or both of a start and an end offset. These are media-type specific.
For video buffers, the start offset will generally be the frame number.
For audio buffers, it will be the number of samples produced so far.
For compressed data, it could be the byte offset in a source or destination file. Likewise, the end offset will be the offset of the end of the buffer.
These can only be meaningfully interpreted if you know the media type of the buffer (the preceding CAPS event). Either or both can be set to GST_BUFFER_OFFSET_NONE. gst_buffer_ref() is used to increase the refcount of a buffer. This must be done when you want to keep a handle to the buffer after pushing it to the next element. The buffer refcount determines the writability(書き込み可能))of the buffer,a buffer is only writable when the refcount is exactly 1,i.e.when the caller has the only reference to the buffer.To efficiently create a smaller buffer out of an existing one, you can use gst_buffer_copy_region(). This method tries to share the memory objects between the two buffers. If a plug-in wants to modify the buffer data or metadata in-place, it should first obtain a buffer that is safe to modify by using gst_buffer_make_writable(). This function is optimized so that a copy will only be made when it is necessary. Several flags of the buffer can be set and unset with the GST_BUFFER_FLAG_SET() and GST_BUFFER_FLAG_UNSET() macros. Use GST_BUFFER_FLAG_IS_SET() to test if a certain GstBufferFlags flag is set. Buffers can be efficiently merged into a larger buffer with gst_buffer_append(). Copying of memory will only be done when absolutely needed. Arbitrary extra metadata can be set on a buffer with gst_buffer_add_meta(). Metadata can be retrieved with gst_buffer_get_meta(). See also GstMeta An element should either unref the buffer or push it out on a src pad using gst_pad_push() (see GstPad). Buffers are usually freed by unreffing them with gst_buffer_unref(). When the refcount drops to 0, any memory and metadata pointed to by the buffer is unreffed as well. Buffers allocated from a GstBufferPool will be returned to the pool when the refcount drops to 0. The GstParentBufferMeta is a meta which can be attached to a GstBuffer to hold a reference to another buffer that is only released when the child GstBuffer is released. Typically, GstParentBufferMeta is used when the child buffer is directly using the GstMemory of the parent buffer, and wants to prevent the parent buffer from being returned to a buffer pool until the GstMemory is available for re-use. (Since 1.6)