Kubernetesとflannel

Kubernetes is a system for managing containerized applications in a clustered environment. It provides basic mechanisms for deployment, maintenance and scaling of applications on public, private or hybrid setups. It also comes with self-healing features where containers can be auto provisioned, restarted or even replicated. 
Kubernetes is still at an early stage, please expect design and API changes over the coming year. In this blog post, we’ll show you how to install a Kubernetes cluster with three minions on CentOS 7, with an example on how to manage pods and services. 
Kubernetes Components
Kubernetes works in server-client setup, where it has a master providing centralized control for a number of minions. We will be deploying a Kubernetes master with three minions, as illustrated in the diagram further below.
Kubernetes has several components:

etcd - A highly available key-value store for shared configuration and service discovery.

flannel - An etcd backed network fabric for containers.

kube-apiserver - Provides the API for Kubernetes orchestration.

kube-controller-manager - Enforces Kubernetes services.

kube-scheduler - Schedules containers on hosts.

kubelet - Processes a container manifest so the containers are launched according to how they are described.

kube-proxy - Provides network proxy services.

 
Deployment on CentOS 7
We will need 4 servers, running on CentOS 7.1 64 bit with minimal install. All components are available directly from the CentOS extras repository which is enabled by default. The following architecture diagram illustrates where the Kubernetes components should reside:
Prerequisites
1. Disable iptables on each node to avoid conflicts with Docker iptables rules:

$ systemctl stop firewalld
$ systemctl disable firewalld

2. Install NTP and make sure it is enabled and running:

$ yum -y install ntp
$ systemctl start ntpd
$ systemctl enable ntpd

Setting up the Kubernetes Master
The following steps should be performed on the master.
1. Install etcd and Kubernetes through yum:

$ yum -y install etcd kubernetes

2. Configure etcd to listen to all IP addresses inside/etc/etcd/etcd.conf. Ensure the following lines are uncommented, and assign the following values:

ETCD_NAME=default
ETCD_DATA_DIR="/var/lib/etcd/default.etcd"
ETCD_LISTEN_CLIENT_URLS="http://0.0.0.0:2379"
ETCD_ADVERTISE_CLIENT_URLS="http://localhost:2379"

3. Configure Kubernetes API server inside/etc/kubernetes/apiserver. Ensure the following lines are uncommented, and assign the following values: KUBE_API_ADDRESS= "--address=0.0.0.0" KUBE_API_PORT= "--port=8080" KUBELET_PORT= "--kubelet_port=10250" KUBE_ETCD_SERVERS= "--etcd_servers=http://127.0.0.1:2379" KUBE_SERVICE_ADDRESSES= "--service-cluster-ip-range=10.254.0.0/16" KUBE_ADMISSION_CONTROL= "--admission_control=NamespaceLifecycle,NamespaceExists,LimitRanger,SecurityContextDeny,ResourceQuota" KUBE_API_ARGS= ""
4. Start and enable etcd, kube-apiserver, kube-controller-manager and kube-scheduler:

$ for SERVICES in etcd kube-apiserver kube-controller-manager kube-scheduler; do
    systemctl restart $SERVICES
    systemctl enable $SERVICES
    systemctl status $SERVICES 
done

5. Define flannel network configuration in etcd. This configuration will be pulled by flannel service on minions:

$ etcdctl mk /atomic.io/network/config '{"Network":"172.17.0.0/16"}'

6. At this point, we should notice that nodes' status returns nothing because we haven’t started any of them yet:

$ kubectl get nodes
NAME             LABELS              STATUS

Setting up Kubernetes Minions (Nodes)
The following steps should be performed on minion1, minion2 and minion3 unless specified otherwise.
1. Install flannel and Kubernetes using yum:

$ yum -y install flannel kubernetes

2. Configure etcd server for flannel service. Update the following line inside/etc/sysconfig/flanneld to connect to the respective master:

FLANNEL_ETCD="http://192.168.50.130:2379"

3. Configure Kubernetes default config at/etc/kubernetes/config, ensure you update the KUBE_MASTER value to connect to the Kubernetes master API server:

KUBE_MASTER="--master=http://192.168.50.130:8080"

4. Configure kubelet service inside/etc/kubernetes/kubelet as below:minion1:

KUBELET_ADDRESS="--address=0.0.0.0"
KUBELET_PORT="--port=10250"
# change the hostname to this host’s IP address
KUBELET_HOSTNAME="--hostname_override=192.168.50.131"
KUBELET_API_SERVER="--api_servers=http://192.168.50.130:8080"
KUBELET_ARGS=""

minion2:

KUBELET_ADDRESS="--address=0.0.0.0"
KUBELET_PORT="--port=10250"
# change the hostname to this host’s IP address
KUBELET_HOSTNAME="--hostname_override=192.168.50.132"
KUBELET_API_SERVER="--api_servers=http://192.168.50.130:8080"
KUBELET_ARGS=""

minion3:

KUBELET_ADDRESS="--address=0.0.0.0"
KUBELET_PORT="--port=10250"
# change the hostname to this host’s IP address
KUBELET_HOSTNAME="--hostname_override=192.168.50.133"
KUBELET_API_SERVER="--api_servers=http://192.168.50.130:8080"
KUBELET_ARGS=""

5. Start and enable kube-proxy, kubelet, docker and flanneld services:

$ for SERVICES in kube-proxy kubelet docker flanneld; do
    systemctl restart $SERVICES
    systemctl enable $SERVICES
    systemctl status $SERVICES 
done

6. On each minion, you should notice that you will have two new interfaces added, docker0 and flannel0. You should get different range of IP addresses on flannel0 interface on each minion, similar to below:minion1:

$ ip a | grep flannel | grep inet
inet 172.17.45.0/16 scope global flannel0

minion2:

$ ip a | grep flannel | grep inet
inet 172.17.38.0/16 scope global flannel0

minion3:

$ ip a | grep flannel | grep inet
inet 172.17.93.0/16 scope global flannel0

6. Now login to Kubernetes master node and verify the minions’ status:

$ kubectl get nodes
NAME             LABELS                                  STATUS
192.168.50.131   kubernetes.io/hostname=192.168.50.131   Ready
192.168.50.132   kubernetes.io/hostname=192.168.50.132   Ready
192.168.50.133   kubernetes.io/hostname=192.168.50.133   Ready

You are now set. The Kubernetes cluster is now configured and running. We can start to play around with pods.
Creating Pods (Containers)
To create a pod, we need to define a yaml file in the Kubernetes master, and use the kubectl command to create it based on the definition. Create a mysql.yaml file: 

$ mkdir pods
$ cd pods
$ vim mysql.yaml

And add the following lines:

apiVersion: v1beta3
kind: Pod
metadata:
  name: mysql
  labels:
    name: mysql
spec:
  containers:
    - resources:
        limits :
          cpu: 1
      p_w_picpath: mysql
      name: mysql
      env:
        - name: MYSQL_ROOT_PASSWORD
          # change this
          value: yourpassword
      ports:
        - containerPort: 3306
          name: mysql

Create the pod:

$ kubectl create -f mysql.yaml

It may take a short period before the new pod reaches the Running state. Verify the pod is created and running:

$ kubectl get pods
POD       IP            CONTAINER(S)   IMAGE(S)   HOST                            LABELS       STATUS    CREATED
mysql     172.17.38.2   mysql          mysql      192.168.50.132/192.168.50.132   name=mysql   Running   3 hours

So, Kubernetes just created a Docker container on 192.168.50.132. We now need to create a Service that lets other pods access the mysql database on a known port and host.
Creating Service
At this point, we have a MySQL pod inside 192.168.50.132. Define a mysql-service.yaml as below:

apiVersion: v1beta3
kind: Service
metadata:
  labels:
    name: mysql
  name: mysql
spec:
  publicIPs:
    - 192.168.50.132
  ports:
    # the port that this service should serve on
    - port: 3306
  # label keys and values that must match in order to receive traffic for this service
  selector:
    name: mysql

Start the service:

$ kubectl create -f mysql-service.yaml

You should get a 10.254.x.x IP range assigned to the mysql service. This is the Kubernetes internal IP address defined in/etc/kubernetes/apiserver. This IP is not routable outside, so we defined the public IP instead (the interface that connected to external network for that minion):

$ kubectl get services
NAME            LABELS                                    SELECTOR     IP               PORT(S)
kubernetes      component=apiserver,provider=kubernetes          10.254.0.2       443/TCP
kubernetes-ro   component=apiserver,provider=kubernetes          10.254.0.1       80/TCP
mysql           name=mysql                                name=mysql   10.254.13.156    3306/TCP
                                                                       192.168.50.132

Let’s connect to our database server from outside (we used MariaDB client on CentOS 7):

$ mysql -uroot -p -h192.168.50.132
Welcome to the MariaDB monitor.  Commands end with ; or \g.
Your MySQL connection id is 4
Server version: 5.6.24 MySQL Community Server (GPL)
 
Copyright (c) 2000, 2014, Oracle, MariaDB Corporation Ab and others.
 
Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.
 
MySQL [(none)]> show variables like '%version%';
+-------------------------+------------------------------+
| Variable_name           | Value                        |
+-------------------------+------------------------------+
| innodb_version          | 5.6.24                       |
| protocol_version        | 10                           |
| slave_type_conversions  |                              |
| version                 | 5.6.24                       |
| version_comment         | MySQL Community Server (GPL) |
| version_compile_machine | x86_64                       |
| version_compile_os      | Linux                        |
+-------------------------+------------------------------+
7 rows in set (0.01 sec)

That’s it! You should now be able to connect to the MySQL container that resides on minion2. 
Check out the Kubernetes guestbook example on how to build a simple, multi-tier web application with Redis in master-slave setup. In a follow-up blog post, we are going to play around with Galera cluster containers on Kubernetes. Stay tuned!
 
References

Creating a Kubernetes Cluster to Run Docker Formatted Container Images -https://access.redhat.com/articles/1353773

Kubernetes Github - https://github.com/googlecloudplatform/kubernetes

Persistent Installation of MySQL and WordPress on Kubernetes -https://github.com/GoogleCloudPlatform/kubernetes/tree/master/examples/mysql-wordpress-pd

テキストリンク:
http://severalnines.com/blog/installing-kubernetes-cluster-minions-centos7-manage-pods-services
補足:
    http://sudhaker.com/41/multi-node-kubernetes-on-centos-7-x-with-flannel
この文章はもっと具体的で、前の文章にdocker関連の修正がないべきで、さもなくばやはり使用できません;