Enums and Structs in C# [Author:Nishant Sivakumar]
13325 ワード
http://www.codeproject.com/KB/cs/csenums01.aspx
Introduction
Just about everything is a heap object when you are using C#. Only elementary native types like int are treated as value types. But there are two value types in C# that are pretty much more useful that first glances would tell you. They are the enum and struct types. Very few tutorials even cover these topics, but they have their own uses. And both of them are a lot more efficient than classes and you can use them in place of classes when they meet your requirements to improve performance.
Enums
Enums are basically a set of named constants. They are declared in C# using the enum keyword. Every enum type automatically derives from System.Enum and thus we can use System.Enum methods on our Enums. Enums are value types and are created on the stack and not on the heap. You don't have to use new to create an enum type. Declaring an enum is a little like setting the members of an array as shown below.
Collapse
|
Copy Code
You can pass enums to member functions just as if they were normal objects. And you can perform arithmetic on enums too. For example we can write two functions, one to increment our enum and the other to decrement our enum.
Collapse
|
Copy Code
Both functions take a Rating object as argument and return back a Rating object. Now we can simply call these functions from elsewhere.
Collapse
|
Copy Code
And here is a sample code snippet showing how you can call System.Enum methods on our Enum object. We call the GetNames method which retrieves an array of the names of the constants in the enumeration.
Collapse
|
Copy Code
Where to use enums
Quite often we have situations where a class method takes as an argument a custom option. Let's say we have some kind of file access class and there is a file open method that has a parameter that might be one of read-mode, write-mode, read-write-mode, create-mode and append-mode. Now you might think of adding five static member fields to your class for these modes. Wrong approach! Declare and use an enumeration which is a whole lot more efficient and is better programming practice in my opinion.
Structs
In C++ a struct is just about the same as a class for all purposes except in the default access modifier for methods. In C# a struct are a pale puny version of a class. I am not sure why this was done so, but perhaps they decided to have a clear distinction between structs and classes. Here are some of the drastic areas where classes and structs differ in functionality. structs are stack objects and however much you try you cannot create them on the heap structs cannot inherit from other structs though they can derive from interfaces You cannot declare a default constructor for a struct, your constructors must have parameters The constructor is called only if you create your struct using new, if you simply declare the struct just as in declaring a native type like int, you must explicitly set each member's value before you can use the struct
Collapse
|
Copy Code
Well, now let's take a look at how we can use our struct.
Collapse
|
Copy Code
Here the default constructor gets called. This is automatically implemented for us and we cannot have our own default parameter-less constructor. The default parameter-less constructor simply initializes all values to their zero-equivalents. This is why we get a 0 as the total.
Collapse
|
Copy Code
Because we haven't used new, the constructor does not get called. Of all the silly features this one must win the annual contest by a long way. I see no sane reason why this must be so. Anyway you have to initialize all the member fields. If you comment out the line that does the initialization you will get a compiler error :- Use of unassigned local variable 's2'
Collapse
|
Copy Code
This time we use our custom constructor that takes an int as argument.
When to use structs
Because structs are value types they would be easier to handle and more efficient that classes. When you find that you are using a class mostly for storing a set of values, you must replace those classes with structs. When you declare arrays of structs because they are created on the heap, efficiency again improves. Because if they were classes each class object would need to have memory allocated on the heap and their references would be stored. In fact lots of classes within the .NET framework are actually structs. For example System.Drawing.Point is actually a struct and not a class.
Introduction
Just about everything is a heap object when you are using C#. Only elementary native types like int are treated as value types. But there are two value types in C# that are pretty much more useful that first glances would tell you. They are the enum and struct types. Very few tutorials even cover these topics, but they have their own uses. And both of them are a lot more efficient than classes and you can use them in place of classes when they meet your requirements to improve performance.
Enums
Enums are basically a set of named constants. They are declared in C# using the enum keyword. Every enum type automatically derives from System.Enum and thus we can use System.Enum methods on our Enums. Enums are value types and are created on the stack and not on the heap. You don't have to use new to create an enum type. Declaring an enum is a little like setting the members of an array as shown below.
Collapse
|
Copy Code
enum Rating {Poor, Average, Okay, Good, Excellent}
You can pass enums to member functions just as if they were normal objects. And you can perform arithmetic on enums too. For example we can write two functions, one to increment our enum and the other to decrement our enum.
Collapse
|
Copy Code
Rating IncrementRating(Rating r)
{
if(r == Rating.Excellent)
return r;
else
return r+1;
}
Rating DecrementRating(Rating r)
{
if(r == Rating.Poor)
return r;
else
return r-1;
}
Both functions take a Rating object as argument and return back a Rating object. Now we can simply call these functions from elsewhere.
Collapse
|
Copy Code
for (Rating r1 = Rating.Poor;
r1 < Rating.Excellent ;
r1 = IncrementRating(r1))
{
Console.WriteLine(r1);
}
Console.WriteLine();
for (Rating r2 = Rating.Excellent;
r2 > Rating.Poor;
r2 = DecrementRating(r2))
{
Console.WriteLine(r2);
}
And here is a sample code snippet showing how you can call System.Enum methods on our Enum object. We call the GetNames method which retrieves an array of the names of the constants in the enumeration.
Collapse
|
Copy Code
foreach(string s in Rating.GetNames(typeof(Rating)))
Console.WriteLine(s);
Where to use enums
Quite often we have situations where a class method takes as an argument a custom option. Let's say we have some kind of file access class and there is a file open method that has a parameter that might be one of read-mode, write-mode, read-write-mode, create-mode and append-mode. Now you might think of adding five static member fields to your class for these modes. Wrong approach! Declare and use an enumeration which is a whole lot more efficient and is better programming practice in my opinion.
Structs
In C++ a struct is just about the same as a class for all purposes except in the default access modifier for methods. In C# a struct are a pale puny version of a class. I am not sure why this was done so, but perhaps they decided to have a clear distinction between structs and classes. Here are some of the drastic areas where classes and structs differ in functionality.
Collapse
|
Copy Code
struct Student : IGrade
{
public int maths;
public int english;
public int csharp;
//public member function
public int GetTot()
{
return maths+english+csharp;
}
//We have a constructor that takes an int as argument
public Student(int y)
{
maths = english = csharp = y;
}
//This method is implemented because we derive
//from the IGrade interface
public string GetGrade()
{
if(GetTot() > 240 )
return "Brilliant";
if(GetTot() > 140 )
return "Passed";
return "Failed";
}
}
interface IGrade
{
string GetGrade();
}
Well, now let's take a look at how we can use our struct.
Collapse
|
Copy Code
Student s1 = new Student();
Console.WriteLine(s1.GetTot());
Console.WriteLine(s1.GetGrade());
//Output
0
Failed
Here the default constructor gets called. This is automatically implemented for us and we cannot have our own default parameter-less constructor. The default parameter-less constructor simply initializes all values to their zero-equivalents. This is why we get a 0 as the total.
Collapse
|
Copy Code
Student s2;
s2.maths = s2.english = s2.csharp = 50;
Console.WriteLine(s2.GetTot());
Console.WriteLine(s2.GetGrade());
//Output
150
Passed
Because we haven't used new, the constructor does not get called. Of all the silly features this one must win the annual contest by a long way. I see no sane reason why this must be so. Anyway you have to initialize all the member fields. If you comment out the line that does the initialization you will get a compiler error :- Use of unassigned local variable 's2'
Collapse
|
Copy Code
Student s3 = new Student(90);
Console.WriteLine(s3.GetTot());
Console.WriteLine(s3.GetGrade());
//Output
270
Brilliant
This time we use our custom constructor that takes an int as argument.
When to use structs
Because structs are value types they would be easier to handle and more efficient that classes. When you find that you are using a class mostly for storing a set of values, you must replace those classes with structs. When you declare arrays of structs because they are created on the heap, efficiency again improves. Because if they were classes each class object would need to have memory allocated on the heap and their references would be stored. In fact lots of classes within the .NET framework are actually structs. For example System.Drawing.Point is actually a struct and not a class.